I need to cut down about 20 of these a few inches below grade. The catch is
they are right next to my neighbor's PVC fence, so I can't get to that side.
I can use my sawzall but I want the cut parallel to the grade which means
getting the entire sawzall below grade and sucking schmutz into the motor.
Do-able and at the top of the list so far.
I was going to rent an excavator (still might) to also remove the concrete blob
but then I'd need a bunch of fill delivered (none on site but there may be some
when they dig up the driveway to repave it, shelving this idea for a few
weeks), hassle factor exceeds the joy of having an excavator.
Portable bandsaw seems like a useful lifetime tool, especially if it can be
mounted vertically to use as a regular bandsaw and also mounted in a chop saw
table. Internet isn't forthcoming on the viability of these options.
Angle grinder won't reach around the back.
Plasma cutter is contraindicated with neighbor's fence.
Any other ideas?
thanks,
jim
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
|