> On Apr 30, 2022, at 05:02, Jeff Scarbrough <fishplate@gmail.com> wrote:
>
> I had 24 in my head, but my head isn't what it used to be. It's the
> common fine pitch for 1/2" threads, whatever that is (verified with
> pitch gauge). 20 now sounds more like it.
Assuming this is five studs on 15 or 16 wheels, 100 lbs is what we always did.
>
>> On Fri, Apr 29, 2022 at 7:58 PM John Miller <jem@milleredp.com> wrote:
>>
>>> On 4/29/2022 4:24 PM, John Innis wrote:
>>> My 16' trailer with 3500 pound axles recommends 80 ft lbs. There are
>>> also 1/2 inch studs. Not sure about the thread pitch, guessing they are
>>> all the same.
>>
>> 80ft/lb sounds right for 1/2in studs and are you sure about that 24tpi -
>> every 1/2in fine-thread lugnut I've seen has been standard 1/2-20.
>>
>> John.
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/pipermail/shop-talk
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/dmscheidt@gmail.com
>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|