--===============2258896276883354821==
--000000000000b4f15205bad8872f
I did this 5 or 6 years ago now, so there are better "plug and play"
options now, but I used two LED strips mounted to a piece of aluminum angle
(a scrap I had lying around). Each strip is about 11.5 inches long, so the
two together span the width of the 24" view window on my cabinet nicely. I
mounted them temporarily-permanently at the top edge of the window with
duct tape so that the LED strips sitting flat on the glass. Works like a
charm. I do have to replace the duct tape every so often...
The strips I used put out 450 lumens each so I get 900 lumens total into
the blast cabinet with no glare since they are flat on the glass with the
aluminum covering them. The manufacturer recommended mounting them to
aluminum bar for heat dissipation and had a special adhesive for that. I
also had to buy a power supply.
More recently, I bought a set of strips on Amazon for under-cabinet
lighting at my work bench that would probably be just about as good for
less money and less effort as it was totally plug and play.
Hope this helps,
Mike
On Mon, Feb 8, 2021 at 1:15 PM Mark Andy <marka@maracing.com> wrote:
> Howdy,
>
> Needing to have the shop dark is my clue that its long past time to change
> the protective film on my blast cabinet...
>
> If I were going to DIY a light setup these days, I'll look into those LED
> strips. A row of those in the top corners of the cabinet would work pretty
> great I'd guess.
>
> Mark
>
> On Mon, Feb 8, 2021 at 12:35 PM Tim . <tims_datsun_stuff@outlook.com>
> wrote:
>
>> Yes, I work in as dark a shop as I can. Next step is to cover the window
>> in the back door of my shop to see if that helps. But, the light that came
>> withe the HF cabinet is woefully dim (like its new owner. ha).
>>
>> ------------------------------
>> *From:* eric@megageek.com <eric@megageek.com>
>> *Sent:* Monday, February 8, 2021 9:04 AM
>> *To:* Shop-talk@autox.team.net <Shop-talk@autox.team.net>
>> *Cc:* Tim . <tims_datsun_stuff@outlook.com>
>> *Subject:* Re: [Shop-talk] blast cabinet light upgrade/improvements
>> badly needed
>>
>> Tim,
>>
>> What worked the best for me was to put a switch to turn off the light
>> above the cabinet. I use standard light bulb inside the cabinet, but once
>> I switched OFF the light above the cabinet, it dramatically improved the
>> vision inside the cabinet.
>>
>> Maybe try turing off the lights in the shop and see if that works for you.
>>
>> "Be as beneficent as the sun or the sea, but if your rights as a rational
>> being are trenched on, die on the first inch of your territory." Ralph
>> Waldo Emerson
>> -Who is John Galt?
>>
>>
>>
>> From: "Tim ." <tims_datsun_stuff@outlook.com>
>> To: "shop-talk@autox.team.net" <shop-talk@autox.team.net>
>> Date: 02/07/2021 20:34
>> Subject: [Shop-talk] blast cabinet light upgrade/improvements
>> badly needed
>> Sent by: "Shop-talk" <shop-talk-bounces@autox.team.net>
>> ------------------------------
>>
>>
>>
>> Hey all,
>>
>> Sorry if this has been cussed and discussed but I need recommendations. I
>> am ready to start doing the "small" but important improvements to my shop.
>> This one is top of the list.
>>
>> Whattayathink?
>> cheers
>> tim_______________________________________________
>>
>>
>>
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/pipermail/shop-talk
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/marka@maracing.com
>>
>> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/salty1249y@gmail.com
>
>
--000000000000b4f15205bad8872f
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">I did this 5 or 6 years ago now, so there are better "=
;plug and play" options now, but I used two LED strips mounted to a pi=
ece of aluminum angle (a scrap I had lying around).=C2=A0 Each strip is abo=
ut 11.5 inches long, so the two together span the width of the 24" vie=
w window on my cabinet nicely.=C2=A0 I mounted them=C2=A0temporarily-perman=
ently=C2=A0at the top edge of the window with duct tape so that the LED str=
ips sitting flat on the glass.=C2=A0 Works like a charm.=C2=A0
I do have to replace the duct tape every so often...
<div><br></div><div>The strips I used put out 450 lumens each so I get 900 =
lumens total into the blast cabinet with no glare since they are flat on th=
e glass with the aluminum covering them.=C2=A0 The manufacturer recommended=
mounting them to aluminum bar for=C2=A0heat dissipation and had a special =
adhesive for that.=C2=A0 I also had to buy a power supply.</div><div><br></=
div><div>More recently, I bought a set of strips on Amazon for under-cabine=
t lighting at my work bench that would probably be just about as good for l=
ess money and less effort as it was totally plug and play.<br><div><br></di=
v><div>Hope this helps,</div><div>Mike</div><div><br></div></div></div><br>=
<div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Mon, Fe=
b 8, 2021 at 1:15 PM Mark Andy <<a href=3D"mailto:marka@maracing.com";>ma=
rka@maracing.com</a>> wrote:<br></div><blockquote class=3D"gmail_quote" =
style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);pa=
dding-left:1ex"><div dir=3D"ltr">Howdy,<div><br></div><div>Needing to have =
the shop dark is my clue that its long past time to change the protective f=
ilm on my blast cabinet...<br><br>If I were going to DIY a light setup thes=
e days, I'll look into those LED strips.=C2=A0 A row of those in the to=
p corners of the cabinet would work pretty great I'd guess.<br><br>Mark=
</div></div><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_=
attr">On Mon, Feb 8, 2021 at 12:35 PM Tim . <<a href=3D"mailto:tims_dats=
un_stuff@outlook.com" target=3D"_blank">tims_datsun_stuff@outlook.com</a>&g=
t; wrote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:0px 0p=
x 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"ltr">
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
Yes, I work in as dark a shop as I can. Next step is to cover the window in=
the back door of my shop to see if that helps. But, the light that came wi=
the the HF cabinet is woefully dim (like its new owner. ha).=C2=A0</div>
<div>
<div id=3D"gmail-m_-5733575341708947030gmail-m_5215055034863229475appendons=
end"></div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<hr style=3D"display:inline-block;width:98%">
<div id=3D"gmail-m_-5733575341708947030gmail-m_5215055034863229475divRplyFw=
dMsg" dir=3D"ltr"><font face=3D"Calibri, sans-serif" color=3D"#000000" styl=
e=3D"font-size:11pt"><b>From:</b> <a href=3D"mailto:eric@megageek.com"; targ=
et=3D"_blank">eric@megageek.com</a> <<a href=3D"mailto:eric@megageek.com=
" target=3D"_blank">eric@megageek.com</a>><br>
<b>Sent:</b> Monday, February 8, 2021 9:04 AM<br>
<b>To:</b> <a href=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank">Sh=
op-talk@autox.team.net</a> <<a href=3D"mailto:Shop-talk@autox.team.net"; =
target=3D"_blank">Shop-talk@autox.team.net</a>><br>
<b>Cc:</b> Tim . <<a href=3D"mailto:tims_datsun_stuff@outlook.com"; targe=
t=3D"_blank">tims_datsun_stuff@outlook.com</a>><br>
<b>Subject:</b> Re: [Shop-talk] blast cabinet light upgrade/improvements ba=
dly needed</font>
<div>=C2=A0</div>
</div>
<div><font size=3D"2" face=3D"sans-serif">Tim,</font> <br>
<br>
<font size=3D"2" face=3D"sans-serif">What worked the best for me was to put=
a switch to turn off the light above the cabinet.=C2=A0 I use standard lig=
ht bulb inside the cabinet, but once I switched OFF the light above the cab=
inet, it dramatically improved the vision
inside the cabinet.</font> <br>
<font size=3D"2" face=3D"sans-serif">=C2=A0</font> <br>
<font size=3D"2" face=3D"sans-serif">Maybe try turing off the lights in the=
shop and see if that works for you.<br>
<br>
"Be as beneficent as the sun or the sea, but if your rights as a ratio=
nal being are trenched on, die on the first inch of your territory." R=
alph Waldo Emerson
<br>
-Who is John Galt?</font> <br>
<br>
<br>
<br>
<font size=3D"1" color=3D"#5f5f5f" face=3D"sans-serif">From: =C2=A0 =C2=A0 =
=C2=A0 =C2=A0</font><font size=3D"1" face=3D"sans-serif">"Tim ." =
<<a href=3D"mailto:tims_datsun_stuff@outlook.com"; target=3D"_blank">tims=
_datsun_stuff@outlook.com</a>></font>
<br>
<font size=3D"1" color=3D"#5f5f5f" face=3D"sans-serif">To: =C2=A0 =C2=A0 =
=C2=A0 =C2=A0</font><font size=3D"1" face=3D"sans-serif">"<a href=3D"m=
ailto:shop-talk@autox.team.net" target=3D"_blank">shop-talk@autox.team.net<=
/a>" <<a href=3D"mailto:shop-talk@autox.team.net"; target=3D"_blank"=
>shop-talk@autox.team.net</a>></font>
<br>
<font size=3D"1" color=3D"#5f5f5f" face=3D"sans-serif">Date: =C2=A0 =C2=A0 =
=C2=A0 =C2=A0</font><font size=3D"1" face=3D"sans-serif">02/07/2021 20:34</=
font>
<br>
<font size=3D"1" color=3D"#5f5f5f" face=3D"sans-serif">Subject: =C2=A0 =C2=
=A0 =C2=A0 =C2=A0</font><font size=3D"1" face=3D"sans-serif">[Shop-talk] bl=
ast cabinet light upgrade/improvements badly needed</font>
<br>
<font size=3D"1" color=3D"#5f5f5f" face=3D"sans-serif">Sent by: =C2=A0 =C2=
=A0 =C2=A0 =C2=A0</font><font size=3D"1" face=3D"sans-serif">"Shop-tal=
k" <<a href=3D"mailto:shop-talk-bounces@autox.team.net"; target=3D"_=
blank">shop-talk-bounces@autox.team.net</a>></font>
<br>
<hr noshade>
<br>
<br>
<br>
<font size=3D"3" face=3D"Calibri">Hey all, </font><br>
<br>
<font size=3D"3" face=3D"Calibri">Sorry if this has been cussed and discuss=
ed but I need recommendations. I am ready to start doing the "small&qu=
ot; but important improvements to my shop. This one is top of the list.
</font><br>
<br>
<font size=3D"3" face=3D"Calibri">Whattayathink?</font> <br>
<font size=3D"3" face=3D"Calibri">cheers</font> <br>
<font size=3D"3" face=3D"Calibri">tim</font><tt><font size=3D"2">__________=
_____________________________________<br>
<br>
<br>
</font></tt><br>
</div>
</div>
</div>
_______________________________________________<br>
<br>
<a href=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank">Shop-talk@aut=
ox.team.net</a><br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/pipermail/shop-talk"; rel=3D"norefer=
rer" target=3D"_blank">http://www.team.net/pipermail/shop-talk</a> <a href=
=3D"http://autox.team.net/archive"; rel=3D"noreferrer" target=3D"_blank">htt=
p://autox.team.net/archive</a><br>
<br>
alk/marka@maracing.com" rel=3D"noreferrer" target=3D"_blank">http://autox.t=
eam.net/mailman/options/shop-talk/marka@maracing.com</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
<br>
<a href=3D"mailto:Shop-talk@autox.team.net"; target=3D"_blank">Shop-talk@aut=
ox.team.net</a><br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/pipermail/shop-talk"; rel=3D"norefer=
rer" target=3D"_blank">http://www.team.net/pipermail/shop-talk</a> <a href=
=3D"http://autox.team.net/archive"; rel=3D"noreferrer" target=3D"_blank">htt=
p://autox.team.net/archive</a><br>
<br>
alk/salty1249y@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox=
.team.net/mailman/options/shop-talk/salty1249y@gmail.com</a><br>
<br>
</blockquote></div>
--000000000000b4f15205bad8872f--
--===============2258896276883354821==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============2258896276883354821==--
|