Depending on the size of the round holes, you can use a hole saw or forstener
bit. A standard drill bit wonâ??t give you a good hole but you could always
file it out.
The rectangular hole will require a bunch of drilled holes & filing. There are
nibbler tools available if you go with the metal plate but it will still
require filing.
Peace,
Pat
Pat Horne
We support Habitat for Humanity
On Sep 9, 2020, at 2:52 PM, Lee Daniels <lee@automate-it.com> wrote:
I need to cut a couple of holes in a rather small electronic project box
(This
one: https://amz.run/3YjE ) - but I'm not sure how to make nice "pretty" holes
in this. It has both a plastic and metal covers, either one works for me, but
I'll have wires through the plastic side. How does one cut a nice hole in a
box like this? Ideally I'll have round holes for wiring and at least one small
rectangle for a switch. See photo. Any suggestions appreciated!
- Lee
<project.jpg>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|