Re: [Shop-talk] I put a rough draft of the truck restore on my website- Check it out

[John Miller <jem@milleredp.com>]

On 6/17/2020 6:05 PM, eric@megageek.com wrote:
> John asked:
>  >Did you fabricate the rocker panels, kick plates, and the corner 
> rounds at the back of the cab?
> 
> I bought what panels I could.  That was both corners,driver's inner, 
> driver's front kick panel, and  the one door bottom (I needed both door 
> bottoms and the inner for both as well.)
> 
>   I couldn't get any passenger side kick or rockers, so I bought two 
> driver's side and cut one up to work.
> 
> I made the pass. Inner, both floorboards, lots of the kick 
> plates/rockers for the rear of the cab and many other pieces.

We're not worthy.  But damn, I wish I had that much space to work with.

John.
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

utox.team.net