Why not use a HeliCoil? They come in 8-32 and 10-32...among other sizes...
Jeff Scarbrough
Corrosion Acres, Ga.
On Thu, Sep 20, 2018 at 12:35 PM Jim Stone <1789alpine@gmail.com> wrote:
>
> This is not an exact answer to your question , but I have done similar
> repairs - although non plumbing - in the past with JB Weld. I cleaned the
> female threads well and then worked just enough JB into the threads. I put a
> light coating of oil on the male threads, screwed them together and then let
> it set. Unscrewing the first time can be a little difficult, but Iâ??ve
> always been able to and have been able to reuse the threads.
>
> While Iâ??ve never done a plumbing repair this way, I canâ??t see why it
> wouldnâ??t work. My inclination would be to put a thin wrap of Teflon tape on
> the male portion and then just leave it alone and hope for the best if I ever
> had to remove it. Worst case, you are back to your original plan.
>
> Sent from my iPhone
>
> > On Sep 20, 2018, at 9:55 AM, Scott Hall <scott.hall.personal@gmail.com>
> > wrote:
> >
> > Background: all the sink and shower faucets in the house are an
> > unidentifiable manufacturer. The house was sitting long enough that they're
> > all "sticky"--don't want to operate. They pull "up and down" or "in and
> > out" to control water flow, then rotate to control temperature, not the
> > "ball" type that pivot up to control flow, then swivel. I've never seen the
> > kind I have before.
> >
> > They're all sticky (don't want to turn on/off), but the worst is the
> > bathroom shower I'm using. I've pulled out the control knob several times.
> > It is fastened to the control valve with a stainless screw into what looks
> > like the phenolic valve. I suspect that I'm destroying the screw threads in
> > the valve each time this happens.
> >
> > My initial plan was to cut into the wall behind the valve and just replace
> > the entire assembly. Advantage: I know how to do that. Disadvantage: yet
> > another distraction.
> >
> > However, maybe I can use a threaded insert to hold this handle into the
> > valve for now. Googling "plastic helicoil" doesn't help much and I don't
> > think I know the right vocabulary. Anyone have a suggestion for keeping
> > this handle stuck to its valve and functioning as a shower for six months
> > or so until its associated bathroom gets gutted anyway?
> >
> > _______________________________________________
> >
> > Shop-talk@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.96
> > Archive: http://www.team.net/pipermail/shop-talk
> >
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/shop-talk/1789alpine@gmail.com
> >
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|