Dave,
That's not a bad idea, unfortunately I just checked and all of the
pulleys designed for 5/8" rope are pretty darn expensive and I would
need at least two of them :(
For the moment John's idea of how to make the pulleys is probably the
easiest/cheapest approach.
On Wed, May 18, 2016 at 4:23 PM, Dave <dave1massey@cs.com> wrote:
> Why not just buy some rope pulleys of the right diameter?
>
> http://www.mcmaster.com/#rope-pulleys/=12guu0a
>
>
> Dave Massey
>
>
>
> -----Original Message-----
> From: Brad Kahler <bkahler1@gmail.com>
> To: Shop Talk List <shop-talk@autox.team.net>
> Sent: Wed, May 18, 2016 11:26 am
> Subject: [Shop-talk] tubing bender dies
>
>
> I now have a need to bend some 5/8" diameter OD 1/16" wall tubing.
> I've been shopping around for dies but the prices I'm finding are
> fairly high for a one time need to make a couple of bends.
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|