John asks about his mower's 'uneven' speed.
John, I'm not a hydro guy, but it seems like this would be the drive
motor. (I would also look at the throttle linkage for both sides, but you
said you checked that.)
The motor is the only thing that would be single sided.
I've also heard that they are not for shadetree repair. (but I've also
heard they rarely go bad since they are constantly lubricated.)
I know that's not much help, but I would try to put pressure gauges on the
feed lines for both drive motors. If they are the same, you have a bad
drive mower.
Sent from my Commodore 64 on a 2400 Baud Modem.
Eric P
"Be as beneficent as the sun or the sea, but if your rights as a rational
being are trenched on, die on the first inch of your territory." Ralph
Waldo Emerson
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|