shop-talk
[Top] [All Lists]

Re: [Shop-talk] Garage door opener problem

To: "shop-talk@autox.team.net" <Shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Garage door opener problem
From: "gordies garage" <mg_garage@comcast.net>
Date: Mon, 15 Sep 2014 10:45:58 -0400 s=q20140121; t=1410792340; bh=UK3n50qgiL/DQj4O8Axze4kzjElw6T8In2uzw702d+o=; h=Received:Received:Message-ID:Reply-To:From:To:Subject:Date: MIME-Version:Content-Type; b=CA4wG0+3IWG199tLZFVggAsqSknpctlPdfBRhKJ1sMa615oDMABFLUrsmLlfxySJ/ yUr7Fe1yLQluNDiq2JpzIdxLXHDsqhy6k6Y6cXVgzA3zCJmHN4FxhEsdp1vcJNnYly gA3heGYRcVeRZYOnMDihJg1DKI1mOPE80/afdYm4aOJEMrTudvG3J8oz9woIE+G9La jX1RzUFs0ANxllRhOqW4qUUKzvg1K4ik4vt3Gv8PCAL4Sm+Se8h27P6Ir5yqAbYiHW 7eVtRWejJm7WYhxdoARogOlBSk1nP7BZUZGqfUyvAXM8DIz0Gyv3GT4LRB+Fc4gEB+ s7kSR5jh6LQ7g==
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <54164155.8020401@frontier.com> <rDuM1o00m0NyJgq01DuPKE@in-mta5.srv.hcvlny.cv.net> <6.2.5.6.1.20140915082045.04e55938@cox.net> <0NBY0015S552BRG0@mta5.srv.hcvlny.cv.net> <CAO8Q7COgPJoKtTeZ4YdT8ZYdM-qdiD4+XsDUb30NZM74y83qUg@mail.gmail.com>
Good point about the 'beam'.  My door is south facing and the sun at just 
the right angle will prevent the door from closing.

--------------------------------------------------
From: "Jeff Scarbrough" <fishplate@gmail.com>
Sent: Monday, September 15, 2014 10:31 AM
To: "shop-talk@autox.team.net" <Shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Garage door opener problem

> I second the beam issue.  I've had occasions before where the beam was
> barely aligned, but the action of the door starting must have shook it
> or flexed it off.  I'd watch the lights on the beam receiver as the
> door is operated and see what happens, or I'd go ahead and clean and
> re-align the beam, making sure it's centered.
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
> On Mon, Sep 15, 2014 at 10:18 AM, Steven Trovato <strovato@optonline.net> 
> wrote:
>> All the advice about lubricating rollers and checking for binding is all
>> good and worthwhile to do.  However, with my Chamberlain openers, when 
>> the
>> light blinks and it refuses to close, it means the safety beam system is
>> detecting an obstruction.  It could be a beam alignment issue, it could 
>> be
>> dirt or something on the lens.  It could be a fault in the circuit board.
>> In my experience, though, it is never related to the door binding.  On my
>> openers the door may reverse because of binding, but this does not  cause
>> the light to blink.  The fact that the  problem went away for a week when
>> the service guy came leads me to believe that it is not a fault in the
>> board.  It is more likely to be a beam alignment or cleaning issue.
>>
>> -Steve Trovato
>> strovato@optonline.net
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/mg_garage@comcast.net
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>