shop-talk
[Top] [All Lists]

Re: [Shop-talk] Oil Breather Tank options

To: Shop Talk <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Oil Breather Tank options
From: PJ McGarvey <pj_mcgarvey@hotmail.com>
Date: Fri, 13 Jun 2014 10:34:17 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <BLU180-W774B6BE57A8700CAA4F84AB42E0@phx.gbl>, <BLU180-W957A2250B6BCABB0B5CDE3B42B0@phx.gbl>, <COL127-W106CFC650A26CA6C7685729A2B0@phx.gbl> FILETIME=[8E68EB10:01CF8714]
Resending just to shop-talk as it was help up by the moderator...

From: pj_mcgarvey@hotmail.com
To: tims_datsun_stuff@outlook.com; datsun-roadsters@autox.team.net;
shop-talk@autox.team.net
Subject: RE: [Shop-talk] Oil Breather Tank options
Date: Wed, 11 Jun 2014 10:27:27 -0400




So when you say oil breather tank, you are talking about a PCV breather?
Something that takes crankcase fumes from the block and possibly valve
cover(s) into a tank and let's them escape to the air?
Summit/Jegs will probably have the best selection and price, then you can also
pick up any fittings/hose/etc you need to install it.  I run one made by
Integrated Engineering on my non-emissions tested 85 VW Golf turbo.  It has
the internal baffles, drain valve, AN -8 adapter threads, breather filter,
probably holds a quart, maybe less.  Don't go too small, or it will fill up
quick.  Trying to imagine what an overfilled catch tank spilling into an
engine bay would do.  yeah, no.
Some have a metal mesh inside the tank to help separate the fumes and condense
the water from them better.  Install wise, it's been said that keeping it near
the engine to keep it warm helps to evap the water a bit.  Google for other
tips on install/setup.  Originally had mine hooked to the exhaust to pull a
vacuum, but made a mess on the rear of the vehicle.  This car has no cat, so
no danger there.  Spat some nice flames from time to time  ;-)
-PJ

> From: tims_datsun_stuff@outlook.com
> To: datsun-roadsters@autox.team.net; shop-talk@autox.team.net
> Date: Wed, 11 Jun 2014 06:17:48 -0500
> Subject: [Shop-talk] Oil Breather Tank options
>
> I need to install one of these on my stroker. I've done a little searching
but
> what I've found so far all looks way too big. I am hoping to mount
something
> small right behind the rocker cover, maybe using the head stud at the back
of
> the engine, so it would need to be pretty small.
>
> Thoughts please.
>
> I sent this to the shop talk list as I know quite a lot of you have classic
> cars.
>
> Thanks!
> tim
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/pj_mcgarvey@hotmail.com
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>