Gill,
It does not take much to fix it. Just a sheet metal screw (might want to frill
the hole to size) with a dollop of gasket sealer ought to keep it sealed for a
very long time.
Best,
Doug (mobile)
-----Original Message-----
From: Gil Fuqua <Gil.Fuqua@cci-ir.com>
Date: Thu, 3 Oct 2013 14:33:36
To: Shop Talk<shop-talk@autox.team.net>
Subject: [Shop-talk] Compressor Leak & Repair
I have a 5hp industrial compressor with an 80 gallon tank that developed a
pinhole leak on the bottom (horizontal leak). The tank has an automatic drain
that cycles each time the compressor comes on; however, I don't use it much
and residual moisture has probably rusted through on the bottom.
I thought about welding a plate across the entire bottom since I suspect other
leaks will appear over time. I would like to keep it if possible since the
compressor is still good.
Anyone have any success in repairing a compressor tank?
Gil
Nashville
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|