shop-talk
[Top] [All Lists]

Re: [Shop-talk] Fluorescent lights (I need help here)

To: Shop-Talk <Shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Fluorescent lights (I need help here)
From: Doug Braun <doug@dougbraun.com>
Date: Wed, 13 Mar 2013 20:56:37 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <0MJM002WCJJ397R0@mta3.srv.hcvlny.cv.net>
I have a pair of fixtures that take 8-foot T12 HO bulbs (which have a
different type of pins at each end).
They are real bright.  Last year I found reasonably-priced GE electronic
ballasts to replaced the original magnetic ones, and now they start right
up in winter weather, and are totally silent.

But I suspect that these types of fixtures are being phased out.

Doug


> At 07:57 PM 3/13/2013, eric@megageek.com wrote:
>
>> OK, I know we beat this horse to death, and I thought I understood it, but
>> I guess i didn't.
>>
>> Here is the situation, I need to add lighting for the shop. I'm replacing
>> two- 4' fluorescent fixtures.  The ceiling is at 14'  and the area I want
>> to light in front of where I work on cars.  So I figured I would add four-
>> 4' fluorescent light fixtures in a "U" shape around the area.  (Think of a
>> parked car...  One light on each side of the front 1/4 panels and two
>> perpendicular to the front of the car so the lights are wrapped around the
>> front end.)
>>
>> I wanted the brightest fluorescent lights I could find.  I hung 32watt,
>> dual bulb T8 fixtures with 6500 Lumens about 1' down from the ceiling (so
>> about 13' off the ground, I need it them this high for clearance issues.)
>>
>> Anyway, I turned them on and I was quite disappointed.  So disappointed
>> that I hooked up my old 4' fluorescent fixtures with unknown T12 bulbs and
>> wattage.  The different was huge!  The new lights were nothing compared to
>> the old ones.
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>