Thanks for the quick replies guys.
The instructions say use a 20 amp fuse which is what I bought.
Now one more quick one....
There is two prong male connection coming off of part of the ignition
swith...one to the wiper and one to an aftermarket fuel gauge.
Can I turn this into a three prong connector and add the horn power lead
to this? I would rather not run a wire to the battery (like the
instructions say since the engine bay is so clean right now).
Thanks again!!
tim
On Sun, Aug 19, 2012 at 1:11 PM, Tim wrote:
> since electrickery is my most weak point I figure I should ask this
> really dumb question:
>
> I want to wire in an aftermarket horn on my Jeep. The wires that came
> with the swith are 16 gauge. The Fuse link I bought to wire into this
> set up is a thicker gauge.
>
> Is this ok?
>
> Thanks!
>
> tim
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/tputland@charter.net
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|