Re: [Shop-talk] Putting floor in attic - can't fit 4x8 sheets

["Eric J Russell" <ejrussell@mebtel.net>]

Do you have a biscuit joiner? If not you now have a reason to own a biscuit 
joiner.
Or glue/screw a backing piece under the unsupported areas.

Eric Russell
Mebane, NC

----- Original Message ----- 
From: "Jim Franklin" <jamesf@groupwbench.org>
To: "shop-talk List" <shop-talk@autox.team.net>
Sent: Sunday, May 27, 2012 2:09 PM
Subject: [Shop-talk] Putting floor in attic - can't fit 4x8 sheets


> The way the house is constructed I can't get a 4x8 sheet into the attic. I 
> can
> do a 4x4 and with some effort a 2x8, but none of those are t&g.
>
> Any options out there besides using some kind of Simpson Tie in place of 
> the
> t&g edge support?
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net