> A flat part of the metal M/C
> presses against a
> flat part of the plastic reservoir, and there is a
> flat rubber washer between them.
That sounds very similar to my Stags. The plastic reservoir had apparently
warped until it no longer pressed firmly against the seal, so I carefully
sanded it back flat, cleaned and reassembled. Worked great for me.
I'm probably paranoid, but I won't use any sort of sealant on brake
fittings. Hylomar uses a solvent that is likely not good for brake seals.
I don't know what modern "sensor safe" silicone RTVs emit, but I'll bet
there is something.
-- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|