> it's just all the two-stage
> compressors I'm familiar with have two cylinders, with just
> one slightly
> larger than the other.
I believe they are, in fact, sized so each cylinder does roughly equal work
for some level of output pressure. On my 2-stage, the high pressure
cylinder is quite a bit smaller in diameter (if you look between the fins).
I don't know, but I would guess that if you are seeing units where the high
pressure cylinder is almost the same, perhaps it has a shorter stroke.
> Since I assume they spin at the same speed, it
> always seemed to me you're getting small gains in pressure.)
I also have a 2-cylinder single stage unit. It works quite well below 100
psi, but above that, the output falls off rapidly. By 130 psi, it really
isn't doing anything at all. By contrast, the two-stage will easily hit 175
psi and, according to the ratings, loses less than 5% of it's output.
Here's a similar unit:
http://goo.gl/We6KG
-- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|