Has anyone tried the Harbor Freight Double Cut Saw? It is certainly a great
deal at its current $70 price, if it is any good. The feedback on it is
certainly mixed. It sounds like it works well, provided the motor doesn't
burn out in the first 5 minutes of use. Since I am only 10 minutes away from
my nearest HF, the hassle having to exchange one isn't too big a deal, if it
cuts as advertised.
http://www.harborfreight.com/5-double-cut-saw-68316-8065.html?ccdenc=eyJjb2Rl
IjoiNDA3MTgxNTIiLCJza3UiOiI2ODMxNiIsImlzIjoiNjkuOTkiLCJwcm9kdWN0X2lk%0D%0AIjo
iODA2NSJ9%0D%0A&utm_medium=email&utm_campaign=4811b&utm_source=1002
And, speaking of the feedback, there is an interesting review with very
specific instructions on breaking in a new motor:
"Before using your saw, Run the Motor! Electric motors need breaking in
before use! Putting a load on a tool before breaking in the motor is
damaging to the saw! It's Easy!
Turn on and run for 30 seconds then
let cool for 5 minutes, then run for 1 minute, then cool, repeat several
times and you should be good. Do this to all your new tools. Sure, you
may get a bad one, if so, you will know instantly. With HF's excellent
return policy, it should be no problem. Putting stress on a brand new
motor damages the brushes and motor itself."
I have never heard this advice before. Would others here recommend that too?
|