You are correct, of course. I was thinking of roller cams when I wrote
'hydraulic' (shouldn't post so late at night, I
guess).
Thanks for setting that straight.
Bob
On 6/25/2011 9:53 PM, John Miller wrote:
>> By all accounts, a non-issue unless you're running a pushrod engine
>> with solid, 'flat' lifters. There are reports of premature cam
>> failures on this type of engine, but I haven't heard of any problems
>> with hydraulic lifter or OHC engines (which is pretty much all newer
>> engines).
>
> No, any 'flat-tappet' - that is, mechanical or hydraulic lash adjustment but
>non-roller lifter sliding on cam lobe -
> engine is at risk from reduced ZDDP levels.
>
> As are some OHC motors, typically those running stiffer-than-stock
>valvesprings with aftermarket cams on bucket or
> other sliding-type lifters.
>
> There's lots of good reasons to build your engines with roller-type valve
>actuation hardware where possible, and this
> is just another.
>
> IIRC API SJ was the last really 'good' oil, SL had half the ZDDP, SM was
>halved again from SL, and I now see an SN and
> I have no idea what it's got.
>
> John.
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/shop-talk/bspidell@comcast.net
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|