25cc 2 stroke engine died mid use. Upon inspection, the original fuel hose
disintegrated and dropped the pickup into the tank. I replaced the hose, and
squeezed the bulb to reprime and the problems started. I can see bubbles in
the fuel as I squeeze the bulb, but then there is no suction. I was able to
suction fuel the old fashion way, so I got fuel into the tube but even then the
bulb couldn't prime the engine. I took the bulb off thinking it might have a
crack, but no, it'll hold vacuum on my thumb just fine. When I put it back on
the plate that it attaches to ahead of the carb, I get a whistle when I push
but no suction when I put my thumb over the fuel line connection. Any thoughts
before I just start replacing parts?
|