Spray a soapy water solution around/on the ball valve. Might show if/where
it is leaking.
Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message -----
From: "Randall" <TR3driver@ca.rr.com>
To: <shop-talk@autox.team.net>
Sent: Sunday, May 08, 2011 9:48 PM
Subject: [Shop-talk] Phantom air leak
> So, I've got this somewhat older 80 gallon air compressor mounted in the
> back yard, and plumbed to the garage. The garage plumbing isn't
> completely
> air tight, so I usually close the ball valve at the tank outlet when I'm
> not
> using the system, to hold pressure in the tank (and avoid having to pump
> it
> up next time I use it).
>
> But lately, the tank will leak down significantly in just a day or two.
> Funny thing is, I left the ball valve open last night, and the tank is
> still
> nearly full 24 hours later. Seems that the only explanation is that the
> valve itself is bad. Does anyone have an alternate theory? Am I
> overlooking something?
>
> And any suggestions on a quality 3/4" ball valve that will actually hold
> 180
> psi air?
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|