John,
Is your pump on the (bottom) end of the well pipe? My pump, for
example, is on the end of about 50 feet of steel pipe sunk into my
backyard.
And you mind sharing what that setup cost, and where you got it? I'm to
the point that I might build a derrick to pull my well out of the ground
if I need to--there is no competent repair or service option locally.
On 4/15/2011 3:35 PM, John Innis wrote:
> I would argue that bigger is not always better. Basically you need to match
> the type of tank to your well pump. When we built our new home a couple
> years ago I was surprised to learn how much the technology for well pumps
> has changed recently. We ended up going with a 3-phase (driven by a small
> phase converter off single phase residential 220). high pressure-high flow
> pump on a phase converter and a tiny pressure tank (only about two
> gallons). This is the best well system I have ever used. The pressure is
> on instantly and does not fall off at all. I can run two showers and water
> the lawn all at the same time with no loss of pressure. If you are sticking
> with an older pump, you will probably want to go with a big pump. But if
> you are considering a new pump, I would highly recommend a system like mine.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|