Can't you just replace the breaker and the receptacle with 30 amp versions?
Doug
On Mar 30, 2011 5:09 PM, "Gil Fuqua" <Gil.Fuqua at cci-ir.com> wrote:
> I recently purchased a 220v band saw for my shop that has a 30 amp plug.
> My shop has plenty of 220v outlets, but they are all wired to 50 amp
> plugs and protected by 50 amp breakers. The 50 amp circuits were set up
> for a welder.
>
> I don't want to add new 30 amp plugs and breakers all over the shop. I
> would prefer to have something that would plug into the existing 50 amp
> sockets and terminate in a 30 amp receptacle for the saw. I also want
> to have a 30 amp breaker in the line that protects the saw. In other
> words, a 30 amp plug and circuit breaker down line from the 50 amp plug
> and breaker.
>
> What's the best way to do this while protecting the saw with a 30 amp
> breaker in the line?
>
> Gil
> Nashville
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/doug at dougbraun.com
|