shop-talk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Shop-talk] cutting exhaust pipe

from [Randall] [Permanent Link][Original]
To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] cutting exhaust pipe
From: "Randall" <tr3driver@ca.rr.com>
Date: Fri, 17 Dec 2010 15:24:18 -0800 
> as you would need a 7
> inch
> diameter wheel to cut all the way thru a 3 inch pipe from just one
> side.

Not so.  Just takes a few extra cuts.

-- Randall 
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Shop-talk] cutting exhaust pipe, Douglas Braun
Next by Date:  Re: [Shop-talk] cutting exhaust pipe, Eric J Russell
Previous by Thread:  Re: [Shop-talk] cutting exhaust pipe, Douglas Braun
Next by Thread:  Re: [Shop-talk] cutting exhaust pipe, Eric J Russell
Indexes:  [Date] [Thread] [Top] [All Lists]