Bevel out the cracks, and be sure to drill out the ends of any cracks/splits
so
they don't spread any further.
>I have a Cushman Truckster with a
fiberglass cab that is in need of patching.
>It has various holes drilled
>in it ranging from 1/4" to about 1/2" in
>diameter. There are also a couple
of good cracks and splits as >well. The
>fiberglass appears to be about
3/16" to 1/4" thick throughout.
>
>I've not worked that much with fiberglass
and would like to know the best way to
>fill the holes. I was >thinking
about grinding away some of the surface
>material to allow some fiberglass
mat to lay below the >surface and then apply
>the gel. Same with the cracks.
>
>Any suggestions?
>
>Thanks,
>
>Brad
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|