I went through this a bunch of times, removing the vinyl graphics off
sportbike
fairings before repair work/repaint. WD40 and a scraper (razor
blade, or
plastic if you want to preserve the paint), followed by a
cleaner-type wax often
takes it off. Next up the chain was 3M wax and
adhesive remover or Goof-off.
Then came acetone/laquer thinner, but you were
definitely repainting after
that...
Good luck!
BTW, next time, use a heat
gun to soften up the sticker before peeling. With
luck, the glue will come
off with the sticker.
On 9/23/2010 10:16 PM, eric@megageek.comwrote:
> Here
is another question that I have. (BTW. thanks for the answers on
> the
trailer brakes.)
>
> I just bought a mason dump truck from a landscape
company. It had
> their name and number on the door in vinyl lettering. I
was able to
> remove the lettering, but there is still an outline of the
letters.
>
> What can I do to clean this up? It seems to be a raised
adhesive and
> grime mix.
>
> TIA
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|