> Does
> anyone know if these older Craftman drill use a standard Jacobs chuck?
Why not pull the chuck off and see? My 3/8 Craftsman had the standard
threaded spindle, but that doesn't mean they all do.
If it's a reversible drill, there will likely be a left hand thread SHCS
that is accessible through the jaw opening. Once that's removed, just stick
a chuck key or similar rod into one of the chuck holes, and give it a sharp
rap to unscrew the chuck.
Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|