Ron, when you do decide to build let me know and I'll send you the
info on the company that built mine. I'm extremely happy with the
overall package (other than insulation that is).
Ron, John, Wayne and Tim,
Thanks for replying.
There are two garage doors located on the gable ends. One is 10' x
11' and the other a 9' x 7' door. There is an entry door next to each
of the overhead doors. No windows in the building although sometime
down the road I may add some windows on the east and west walls (long
walls) to provide light.
As everyone stated I should have posted where I live and temps. We
live in Richmond Kentucky which is about 90 miles due south of
Cincinnati. This past winter was our second winter here (first with
the shop). For temperatures this past winter we had several weeks
straight in single digits and then a month or more where temps were in
the teens and twenties. The rest of the time temps were probably in
mid 30s to mid 40s. Temperatures (air temps) in the shop were
typically low to mid 30s during most of the winter with the floor temp
getting no colder than about 30 to 31 degrees even during the coldest
periods (verified with a laser temp gauge).
Using a small 1500 watt portable heater I was able to work in specific
spots without to much discomfort.
As mentioned any sort of gas is not an option so its electricity or
nothing. At this point in time I don't really want to add more
insulation either. Down the road if no suitable heating option works
out then adding insulation may happen but certainly not for the next
few years or more.
One reason I'm interested in the Infrared variety of heater is because
its my understanding you don't necessarily have to leave the heat on
24/7 (even at reduced setting). I will likely turn the heat on prior
to actually starting any kind of work but leaving it on 24/7 probably
won't happen either.
My main goal is to knock the chill out of the air prior to and during
work periods. If on the coldest days it's still too cold then I'll
find something else to do in the house :)
Brad
On Wed, Jun 9, 2010 at 10:02 AM, Ronnie Day <ronnie.day@gmail.com> wrote:
> Brad,
>
> First I want to say I'm VERY envious! I plan to do something similar
> in the next year to 18 months, but I really wish I had it NOW!
>
> Where are you located and what temps do you expect to see? You didn't
> say anything about doors and windows and they probably wouldn't be a
> huge factor anyway. You do mention R4 insulation, which isn't much.
> Generally I've heard that every dollar spent controlling heat or cold
> infiltration equals $6 spent heating or cooling, so I'd consider
> more/better insulation first. We're in the middle of building about 60
> miles NE of Austin and we're having the house foam insulated.
> Basically we'll have the world's largest styrofoam cooler. I'll
> probably do the same with the shop. In your case, I'd say additional
> insulation would be the first step.
>
> Also I'd take a serious look at propane, especially if you see really
> cold temps for prolonged periods. Electric heaters aren't cheap to buy
> and operate, and unless you already have a very healthy electrical
> service installed you might have to get it upgraded to handle the
> additional load. Regardless of which way you go with the heaters, I'd
> consider leaving the heat on, maybe using a programmable thermostat to
> keep the temps in the shop reasonable 24/7, then warming things up an
> hour or so before you start working. Yeas, that's going to cost you,
> but If you don't do something like that and it's really cold outside
> (and in the shop) most of the time, it won't get warm quickly enough
> in the evenings to do much good anyway.
>
> FWIW,
> Ron
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|