Message: 4
Date: Mon, 29 Mar 2010 09:53:39 -0400
From: Jim Franklin <jamesf@groupwbench.org>
Subject: [Shop-talk] Cable ferrule pliers?
To: Shop-Talk List <shop-talk@autox.team.net>
Message-ID: <CB31AD75-64D1-4684-BC51-39DCCFC88A97@groupwbench.org>
Content-Type: text/plain; charset=us-ascii
I have a lot of ferrules to crimp:
http://www.amazon.com/Columbus-McKinnon-52337DIB-Cable-Ferrules/dp/B000WCQY4
C
/ref=sr_1_2?ie=UTF8&s=industrial&qid=1269870558&sr=8-2
Are there specialized tools? I don't get any usable hits on Google. If not,
what are the best pliers to use?
I'd rather not spend $50+ on a specialized tool, but < $50 at an easy place
like Sears I would do. I do have a decent collection of shop/home pliers
though. Vice-grips come to mind as having a nice leverage ratio.
I've had good success using a set of small bolt cutters with the jaws ground
'flat'. Easy to use (grind the jaws so that fully closed is correctly
crimped) and cheap: you can use some $10 cutters from HF.
Mark.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|