shop-talk
[Top] [All Lists]

Re: [Shop-talk] How to remove corroded batteries from an Aluminum

To: "J.C. Hassall" <jhassall@blacksburg.net>
Subject: Re: [Shop-talk] How to remove corroded batteries from an Aluminum
From: "David C." <cavanadd@verizon.net>
Date: Sun, 31 Jan 2010 18:48:14 -0800
I had this happen to a full sized 3 D cell maglite years ago.  I sent it 
back to Mag and they sent me a new one (free) along with a terse note to 
please try to change my batteries more often.

J.C. Hassall wrote:
> We found the long-AWOL Maglite, only to find that the alkaline batteries
> went TU a looooong time ago and are badly corroded into the case. I've
> picked away as much loose corrosion as possible, but those babies seem
> to be welded in there. What's a good way to extricate the batteries? I
> suspect it'll require a chemical solution, as I ran a couple of sheet
> metal screws into the rear battery case and tried to pull, no joy.
>
> tia
>
> jim
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Suggested annual donation $12.96


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>