Scotch-locks are 3M's version of wire nuts. You have to have two (or
more) stripped wire ends to connect with them. T taps are crimp on
connectors that connect in the middle of a wire, no cutting necessary as
the metal connector in the T tap cuts the insulation when the connector
is crimped onto the wire.
I generally regard T-taps as a Bad Thing and won't use them on my
motorcycles or cars. (I try to avoid wire nuts, too.) They get loose,
can cut the wire, and generally cause problems. I prefer a soldered
splice on motorcycles, or, better yet, a fused auxiliary distribution
panel.
Steven Trovato wrote:
> Hello all and Happy New Year. I am getting ready to install a remote
> car start unit. The installation manual says:
>
> If you use tapping connectors such as T-Taps (not to be confused with
> Scotch-locks), avoid using them in higher-current applications (constant
> 12V, ground, etc.) These connectors are inferior in quality and should
> be avoided.
>
> So, can someone tell me the difference between T-Taps and Scotch-locks?
> I always thought that "Scotchlok" was just 3M's brand name for T-Taps. I
> can find lots of arguments online about how soldering is better. In the
> discussions, it seems that many people seem to agree with my manual, and
> they treat scotch-locks and T-Taps as different things. Can anybody
> clear this up for me? Thanks.
>
> -Steve Trovato
> strovato@optonline.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as cavanadd@verizon.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|