On Fri, Dec 4, 2009 at 5:58 PM, Randall <tr3driver@ca.rr.com> wrote:
> If your existing switch is the old-fashioned kind that uses a bimetal
> spring; you may be able to "recalibrate" it by rotating the mounting post
> for the spring.
>
> Or if it uses a bimetal spring plus a mercury switch, just mount it on the
> wall crooked <G>
>
> I did some quick searching, but everything I found either wouldn't go that
> low, or cost over $100.
> Here's one that will go down to 39F, though (and might be modifiable to go
> a
> bit lower, as above)
> http://www.electricsuppliesonline.com/ro20242wienc.html
>
>
I wouldn't trust a mechanical thermostat to be accurate within 5 degrees F.
--
David Scheidt
dmscheidt@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|