*Wull, I'm gonna try it again . . I missed the "LINE" input bit . . .
Thanks!*
On Tue, Nov 3, 2009 at 11:32 AM, Steve Dillen <sdillen@telus.net> wrote:
> ??? Why didn't this work? The VCR would effectively be your RF
> modulator....and should work fine if it's configured as follows:
>
> 1. DVD player "video/audio out" ---> VCR "video/audio in"
> 2. VCR "RF" (coax) out ---> TV "RF" (coax) in
> 3. VCR set to "LINE" input. This is the key....otherwise the VCR is
> looking for RF signal and is ignoring the line input terminals.
> 4. TV tuned to modulated channel as supplied from VCR
>
> Any VCR should be able to do this -- even one from back in the '80s when
> consumer cameras didn't have a tape transport system in them and relied on
> composite signals being plugged into an external VCR.
>
> Steve Dillen
> Maple Ridge, BC
>
> Elton E. (Tony) Clark wrote:
>
> On Tue, Nov 3, 2009 at 10:20 AM, Larry Spector <lspector@gmail.com>
><lspector@gmail.com> wrote:
>
>
>
> Does your VCR have matchin red/white/yellow inputs? If it does- you
> may be able to run the DVD player through that, and into the TV.
>
> *I tried that, no luck*
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as sdillen@telus.net
>
>
> Shop-talk mailing list
> http://autox.team.net/mailman/listinfo/shop-talk
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|