Not sure what you mean by inside and outside teeth. There is a rack and a
gear. The gear spins as it goes up and down the rack. No, there is no
adjustment. Nor is there and ajustment on manual ones. The ratio is fixed.
Both the manual and electronic ones let you adjust zero to your hearts
content.
The most effective way I've found to check the quality of a caliper is to
close the jaws, zero the display, open and close the jaws, and see if it is
still zeroed. Don't know of any way to ensure a caliper os good and
undamaged by mail order.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|