This has nothing to do with wirestripping, but the use of the jacknife
reminded me of this story. My daughter called a few years ago to tell me her
car wouldn't start, she'd left the lights on. I instructed her to open the
hood, turn on the lights which would be dim, take her Swiss Army knife's
large blade, jam it between the battery post and the cable, bend the knife,
cut your finger. Then, try again and when the lights get bright, turn them
off and start the car. Five minutes later she called back and said "I'll
finish the job after I find a band aid."
Brian
On 9/23/09 2:48 PM, "john niolon" <jniolon@bham.rr.com> wrote:
> well , thanks for all the replies... liquid nitrogen...teeth pulling and
> all... guess I'll try the utility knife with the blade somewhat retracted
> and see what happens... my next try will be with a "V" type cutter and
> finally the tubing cutter.... the last sounds the easiest to me... reports
> from the emergency room to follow...
>
> later
> John
> ----- Original Message -----
> From: <shochschild@att.net>
> To: <shop-talk@autox.team.net>
> Sent: Wednesday, September 23, 2009 4:29 PM
> Subject: Re: [Shop-talk] stripping large wire
>
>
>> a real man would pull it off with his teeth...
>> _____
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|