BTW, I recently read of a nice way to make a through-bulkhead PVC pipe flange.
You can easily get a PVC fitting that goes from a glue-in socket to male or
female pipe threads. But the threads are tapered of course, so you can't
really use them like a nut and bolt to go through a bulkhead.
The trick is to
get the equivalent PVC fittings for electrical conduits. They fit the same
size PVC pipe, but have straight threads. Then you can drill the
correctly-sized hole through the barrel, pass the male fitting through it, and
use a female fitting as a nut to hold it in place.
This trick would help you
make a 1" or 1.5" dropshaft.
Doug
--- On Tue, 6/30/09, nick brearley
<nick@landform.co.uk> wrote:
> From: nick brearley <nick@landform.co.uk>
>
Subject: Re: [Shop-talk] How to Make Water Flow Downhill
> To: "David Hillman"
<hillman@planet-torque.com>
> Cc: "Shop Talk List" <shop-talk@autox.team.net>
> Date: Tuesday, June 30, 2009, 1:19 PM
> David Hillman wrote:
> > Since
we've been on the topic of moving
> water around lately, and I cannot figure
this problem out, I
> have to ask this stupid question. How can I make water
> flow downhill?
> Could you try fitting a vertical dropshaft outside the
>
barrel? Fit a right angle bend to the existing outlet
> point then a length
of tube (say 1 inch i.d.) vertically
> down to ground level terminated in
another right angle bend
> with hose connection. That way should increase the
head of
> water in the hose and overcome the friction in the walls
> which the
cause of your problem, IMHO. Particularly in the
> coiled hose.
>
> Nick
Brearley
> _______________________________________________
> Support Team.Net
http://www.team.net/donate.html
>
> You are subscribed as doug@dougbraun.com
>
> Shop-talk mailing list
>
>
http://autox.team.net/mailman/listinfo/shop-talk
>
>
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|