Thanks to Pat, Doug and John
Spanner was the word I was trying to think of.
Was able to work around it, now to find an 1-1/2" dia
hole punch!
Enjoy....
Steve Hammatt
Mount Vernon WA USA
----- Original Message -----
From: "John Mitchell" <jmitch@snet.net>
To: "Steve Hammatt Mount Vernon WA USA" <gsteve@hammatt.com>
Cc: "Shop Talk" <shop-talk@autox.team.net>
Sent: Wednesday, June 03, 2009 6:21 PM
Subject: Re: [Shop-talk] type of wrench?
> There's a guy on ebay that sells quite a variety of bezel tools and
> may
> have what you need. Here's on of his items 200319405455 John
> Mitchell
>
> Steve Hammatt Mount Vernon WA USA wrote:
>> I've got an instrument face to remove. The lens is held in by a
>> "ring
>> nut" that has four external slots (90 degrees apart) that need a
>> socket type wrench with four matching "tangs" that would engage
>> into
>> the slots. I cannot use a hinged half-circle wrench that would be
>> parallel to the face. Anybody remember the name of the type of
>> drive
>> I'm looking for?
>> Thanks.
>>
>> Steve Hammatt
>> Mount Vernon WA USA
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> You are subscribed as jmitch@snet.net
>>
>> Shop-talk mailing list
>>
>> http://autox.team.net/mailman/listinfo/shop-talk
>>
>> http://www.team.net/archive
>>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.52/2152 - Release Date:
06/03/09 05:53:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|