I don't agree. 40-on, 60-off pressure switches are commonly used in
many houses, including mine. All the appliances work just fine. The
variation in pressure as the system cycles is not usually
noticeable. 70psi is a little above normal, but this is usually
just a matter of adjusting the cut-off point on the control
switch. Actually, the whole switch is not that expensive, so if it's
rusty and crusty from years of service, it's easier to replace than adjust.
-Steve Trovato
strovato@optonline.net
At 07:24 PM 3/24/2009, Art Halfnights wrote:
>Good Day Group If your tank pressure is 70 PSI then you need a pressure
>reducing valve in line Water tanks, washing machines etc. work on about 35
>psi only. How you get 70psi at the tank as I asked yesterday about the pump
>you are using must be deep well is the pressure not adjustable ??? where is
>the on off pressure switch?? Art Halfnights.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|