I bet an ordinary carbide cut-off wheel (or maybe two)
would do it OK, especially with a big 8" grinder.
Doug
--- Steve Shipley <shiples@comcast.net> wrote:
> Has anyone had any experience in using a diamond
> blade on an angle grinder
> to cut concrete sewer pipe?
> I'm repairing an old sewer line that is part clay
> and part concrete. I
> need to trim the ends of the existing
> pipe to square them up so I can use rubber
> connectors to join the PVC to
> the existing 6 inch pipe.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|