John brings up a very good point. Normally aluminum wire is run from
a spool gun or a push pull gun. You can run aluminum thru a push gun
if (a) you are lucky, (b) the gun cable is short - 10 feet of less, (c) you
have a teflon liner, (d) you are using 3/64 or larger wire, (e) you have
the correct feed rollers for aluminum and (f) 5356 or other suitably stiff
aluminum wire.
Note that I am not saying you can not push aluminum without (a) thru
(f) but the less of (b) thru (f) you have the more (a) you will need. I get
away without (b) and run it thru a 15 foot cable, but I am very careful
to make sure it is as straight as possible and I have (c) thru (f) in place
and it appears as though I also have some (a).
Otherwise you will discover what the term "birds nest" means.
From: "John T. Blair" <jblair1948@cox.net>
> and possibly a new liner for you
> gun depending on the size of the Al. wire you use.
Arvid
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|