You really ought to get it sandblasted or
bead-blasted, since it is already separate from the
vehicle.
If you really can't do that, you could sand off most
of the rust, and use a phosphoric acid based product
to deal with the rest. If you do this, you can
probably prime it with epoxy primer and not have to
mess with "rust encapsulator" type products.
Doug
--- Barry Schwartz <v6spitfireguy@cox.net> wrote:
> What kind of treatment would work best for coating
> the part after sanding
> down as much of the rust as I can? Eastwoods rust
> encapsulator, I have
> some of that? Remember, this isn't a frame or
> hidden part, but an exterior
> body panel - so it would be primed and painted -
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|