Howdy,
On Wed, 28 May 2008, David Scheidt wrote:
>> Quick question about oxy-acetylene cutting.
>>
>> When I cut with my torch, the molten metal b reconnectsb behind my cut.
>> This means that I need to go back and recut the metal to separate it.
>>
>> I have my acetylene set at around 7psi and my O2 at about 20 psi.
>
> I use more like 3-5 PSI acetylene, and about 20 psi oxygen. It sounds
> like you've got too much heat into the work.
or you're not going fast enough, not that I'm any particular expert.
Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|