Traci, if you don't have an ox/acty torch you can use a hand propane torch.
It is just that the welding torch does an excellent job of concentrating the
heat. Also, once you get that first punch mark centered, you can punch it
again. The combination of penetrant, heat and vibration will loosen up the
rust and corrosion. Don't give up just take your time.
-----Original Message-----
From: shop-talk-bounces+gerrybraz=cablespeed.com@autox.team.net
[mailto:shop-talk-bounces+gerrybraz=cablespeed.com@autox.team.net] On Behalf
Of Traci Pearson
Sent: Wednesday, May 21, 2008 7:58 PM
To: shop-talk@autox.team.net
Subject: [Shop-talk] more info on sheared bolt
Hi again!
I don't weld, and this isn't a good time for me
to learn, so welding of any sort is out...if I'm
going to fix it myself. And this isn't a bolt
that takes a lot of stress or torque. The frame
member the bolt goes into not only appears to be
steel but, given that the rest of the frame it, it probably is.
Traci Pearson
Pearson Technical Communication
Writing, Editing, Information Design Print and Online
pearsontechcomm@comcast.net
(303) 410-9101
When something can be read without great effort,
great effort went into its writing.
~ Enrique Jardiel Poncela
You are subscribed as gerrybraz@cablespeed.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|