Nolan wrote:
>
> Interesting thread to follow. I tried a pan like
> these once, never again.
> The hot oil splattering off the flat surface was
> not pleasant.
Hmmmmm...
I've had the opposite experience. Every time I pulled out an open top
container, it would tend to slosh over the top and spill.
My Blitz has a slopped (toward the center "drain") surface, not "flat".
If I drop the oil pan plug, it doesn't drop to the bottom of the hot oil
in the pan (there's a grid in the drain to keep if from falling
through). And the oil never sloshes out.
Maybe the difference is that the Blitz pans are a couple of feet across,
so it catches everything. I've had a small rectangular catch pan in the
past that never worked right since it was too small.
I do have a problem when I change oil in my truck - the drop is so high
that the oil stream tends to get blown around by the wind, but that
happens with any pan. I cured that problem with one of those Fram "Sure
Drains" that uses a screw on hose to drain the pan - no more splatter.
Tim Mullen
_______________________________________________
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
|