On the ones I already tried to "rot" out, I did drill a series of holes
with a 1" spade bit and 3/4" drill.
These particular stumps are approx 12" diameter.
I have it already flush cut so I can just mow over it. I am just
looking for suggestions of things to make it rot faster. I figure that
when the shop gets built that there will be a backhoe there anyway and
if I have accelerated the rotting process, it should pop right out. I
will drill the holes in these as well.
I hadn't thought of making sure it was totally dead. The stumps do seem
to live for a couple of years after cutting off the rest of the tree.
Thanks for the suggestions,
Brian
_______________________________________________
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
|