shop-talk
[Top] [All Lists]

Re: [Shop-talk] FW: Anode for compressor

To: "Arvid Jedlicka" <arvidj@visi.com>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] FW: Anode for compressor
From: "Karl Vacek" <kvacek@ameritech.net>
Date: Tue, 7 Aug 2007 12:04:16 -0500
> This and the other water heater descriptions may be the salient point - 
> the electrode is totally emersed in the electrolyte and is
> separated from the tank by the electrolyte except at the one point - the 
> top of the tank. Therefore the current flows from the
> electrode thru the electrolyte to the tank then back to the electrode at 
> the single connection. A really spiffy battery.


Why not slip maybe 3-4 thin o-rings or similar around the rod to support is 
just above the bottom of the tank, and cover the ends of the rod so they 
can't contact the end-bells ?

A galvanized-interior tank would be nice.... 
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>