I used a solid core door. I purchased a damaged one at the local Home
Defect for cheap. I then covered the top with a piece of Formica. I used
the water based contact cement. That made it easy to get it off when it
needed to be replace. I found a damaged 4x8 sheet of Formica and got it for
like 5 bucks. The Formica cleans up real nice. Welding splatter makes a
bit of a mess but who cares.
On 2/10/07, old dirtbeard <dirtbeard@pacbell.net> wrote:
>
>
> Hi guys,
>
> I am going to build a 8'x2' work bench along the side of my home garage
> (it is
> an "inset" that will clear the parked vehicles. I have a heavy duty
> Hercules
> welded steel 7'X3' workbench with a large vice, etc., and this second
> bench
> will be for lighter work and additional surface area.
|