"Also. Anyone know of a good source of some strong and small diameter
cable.
I have forward tilt bonnet on my Bugeye and want to support the bonnet
in the open position with some cable but can't find any in about a 1/8"
size.
I need also to be able to crimp some loops on the end for inner fender
attachment points."
For the cable, I would check with a local rigging supply store. They
should have exactly what you need. If there is not one local, I looked
in McMaster-Carr and they have a huge selection of cable and end
fittings to create loops.
Good luck
Brian Warrick
Nampa, ID
|