If you want to avoid buying a fish tape just for this
one job, here's what worked for me when a pulled wires
through a conduit for my garage a couple of years ago:
I took a long-enough piece of thin nylon cord and tied
a wadded-up plastic bag to one end. I shoved it in
one end of the conduit and applied my shop-vac to the
other. In a flash the cord was sucked through the
conduit, and I used it to pull the wires. If you have
a somewhat rusty metal conduit (I had new PVC) this
might not work, but there's no harm in trying...
Doug Braun
--- john matthews <john__matthews@hotmail.com> wrote:
>
> Hi,
>
> I'm finally about to rewire my shop and need to pull
> new wire for a
> sub-panel.
|