Peter Murray wrote:
>
> john niolon wrote:
>
>> shop content... I watch tv in the shop...
>>
>> I've got the standard Dish Network setup... 4 sets , 2 receivers.
>> Main TVs
>> (connected to receivers) are set to channel 3... remotes are set to
>> Channel
>> 60.
>
>
>
> The DVR unit needs to have a video/audio connection to the VCR. If
> you're using the RF connection to display it on the TV, can you use
> the video/audio outputs to connect it directly to the VCR? Picture and
> audio will be cleaner, too...
If you are using RF, use channel 4 instead of channel 3. The higher the
channel the better the image.
Peter J. Thomas
|