Water head pressure is equal to 44#/100ft.
Do you really want a 200ft tall tower next to your house?
We run on 35-50# and it's fine.
I had 90psi at the cabin and kept blowing up hoses and the pipes would
knock and groan. VERY annoying. I installed a regulator to drop the
pressure.
We were the lowest point in the county, well below the level of the
reservoir and pumps. Like the Old man in "Follow that Dream"...."Still
too much pressure".
-----Original Message-----
From: shop-talk-owner@autox.team.net
[mailto:shop-talk-owner@autox.team.net] On Behalf Of Scott Hall
Sent: Thursday, June 10, 2004 9:53 PM
To: Shop-Talk List
Subject: water pressure, was:Re: Shallow well water pumps
I've been meaning to ask this question as well.
the new house has crappy water pressure, and is on a well. well pump
just
replaced, have between 45 and 60 p.s.i., per the pump guy, 60 is the max
because the storage tank shouldn't be subjected to more.
so in northern's catalog I see what seem to be pumps for this very
purpose
- install in the house, and raise the water pressure.
anybody done this, or have a better idea for getting decent water
pressure? I'm thinking it should go after the water heater, but then
I'd
need one for cold water and one for hot, though I'll pay it to not have
to
worry about the water heater leaking.
do the pumps actually work? is there a lag before they cut on? I know
the
pipes will last slightly less long under the increased pressure, but I'm
just looking to get to ~90 p.s.i., which is what the old house had, I'm
told, and those pipes are 30+ years old, with nary a leak yet. the old
house's pressure could etch glass. excellent.
alternatively, I was thinking about...a water tower (don't act like I'm
crazier then anyone else here). maybe above the second story, built
into
an addition... seriously. just a larger, elevated storage tank above
the
house, with the structure to keep it there safely. just need a pump to
get
it there, but after that, gravity does the rest. the problem I'm having
is
how high, and how big a pipe down to get the desired pressure out. what
I
need is a municipal civil engineer.
I thought about it because we were just at a city that has been using
the
same tank since 1931. it's only 100 feet up (I know, but it was feeding
a
whole city, I just need to feed a house) and it wasn't that big either.
I
asked their contractor, but he thought I was kidding.
something to think about when talking to the draftsman for the
addition...
scott
|